Novopress EMC10
Rebar/Mesh Cutter

The EMC 10 is equipped with a 180° rotateable and compact cutting head, allowing easy cuts, even in cramped situations. Cutting speed is approx. 1s per cut, saving hours over hours compared to manual cutting tools. Cutting blades as well as the complete cutting head are easy and inexpensive to exchange.

Power Drive	230 V / 50 or 110 V / 60 at 380 W
Weight	approx. 4 kg / 10 lbs
Length	420 mm / 16.5"
Width	65 mm / 2.5"
Height	140 mm / 5.5"
Cutting capacity	10 mm Ø or US # 3
Cutting performance	approx. 1s per cut
Force	35 kN (3,5 t)

Novopress EMC 10V
Rebar/Mesh Cutting Tool

The EMC 10V is equipped with a unique adjustable cutting head for rebar mesh up to 10 mm Ø or US # 3 mesh. It allows a precise adjustment of the cutting depth whereby 1, 2 or 3 layers of mesh wire will be cut. The underlaying layers remain untouched due to the adjustable depth device.  Cutting blades, as well as the complete cutting head are easy and inexpensive to exchange, with no service shop needed.

Novopress EMC 16
Rebar/Mesh Cutting Tool

The EMC 16 has an impressive narrow cutting head of only 40 mm or 1.6" in width. Thus it is ideal for very tight cutting applications in cramped areas. Though the cutting performance is outstanding with only 2,5 sec. per cut and a very convenient weight of only 7,5 kg / 15 lbs. The cutting blade is three sided and thus very cost effective. Practically there are always two spare blades available within the tool.

 

Power drive	230 V / 50 or 110 V / 60 at 380 W
Weight	approx. 7,5 kg / 15 lbs
Length	560 mm / 22"
Width (cutting head)	40 mm / 1.6"
Height (cutting head)	120 mm / 4.7"
Cutting capacity	16 mm Ø or US # 5 12 mm Ø or US # 4 double
Cutting performance	approx. 2,5s per cut
Force	40 kN (4 t)