Gensco Equipment
     
Subscribe to the GENSCO Email Newsletter:





PG Series
Light Industrial Rotary Bender

 

PG35      
Capacity: #8 – 1”– 25 M Rebar  
Three Phase Electrics Required
w/toolset for stirrups, pins and rolls,
foot pedal control, electronic control
Fine tuning dial for angle adjustment
CW/CCW bending with full table rotation
Includes: 9 x 9  Controller
Angles are set by pin placement.  Up to 9
pins can be placed around the turntable. 
Operator sets the order of stops/angles on
the control panel and the machine automatically
sequences from bend to bend as pre-set
Single Speed: 10 RPM  
2HP 220 volt, 3 phase electrics
(or as required)
Available options:
Spiral radius attachment, variable speed control (9-18 RPM)

 

 Download PG Brochure

Click here for bending video A
Click here for bending video B




PF-N Series
Heavy Duty Rotary Style

PF32-N & PF40-N
PF32-N - Cap. to #8 – 1” – 25M Rebar
PF40-N - Cap. to #9 – 1-1/8” – 30M Rebar

PF32-N Available in 1 or 3 phase electrics.
Benders include toolset for stirrups, pins and rolls, foot pedal control, fine tuning dials for angle adjustment, CW/CCW bending with full table rotation, Special heavy steel blocks to hold retaining (hold-back) pins
Includes: 9 x 9  Angle Controller:
Up to 9 different angles can be pre-set on the machine with “PIN” placement.  Operator can then select the sequence of bends that  are required.  Angles are easily adjusted by changing pin position or by rail adjustment.  Single Speed: 10 RPM - 2 HP  /  1.5. Kw

Available options:
Spiral radius attachment, variable speed control (9-18 RPM)

 Download PF-N Brochure
 PF Attachments & Options





PFT Series
Rotary Table Bender w/ SHEAR

PFT 32/26 & 38/30
Capacity: Cuts and Bends
PFT 32/26 up to #6 – 3/4” – 20M Rebar
PFT 38/30 up to #8 – 1” – 25M Rebar

or multiples of smaller bars
Up to 2.5 HP  Electric Motor
Available with 1 (230V) or 3 phase electrics 
Toggle switch for Cutting or Bending.
9 x 9  Controller: 
Angles are set by pin placement.  Up to 9 pins can be placed around the turntable.  Operator sets the order of stops/angles on the control panel and the machine automatically sequences from bend to bend as pre-set. Fine tuning dial for angle adjustment - Single Speed: 9 RPM standard
Cast steel cutting head, safety cover over cutting area with interlock switch. Full set of pins and rolls for standard bending and special stirrup toolset, Foot pedal control
Available options:
Spiral radius attachement, variable speed control (9 - 18 RPM)

 Download PFT Brochure
 PFT Attachments & Options





LRB Series
Heavy Duty Production Rotary Benders

LRB Series
(LRB32, LRB40, LRB50)
 
Capacities to: #11 1-3/8 35M Rebar
3 phase electrics
Single speed  up to 16 RPM, dual adjustable retaining rails for placement of hold back pins. Easily adjustable for bar placement and fine tuning angles. Allows production of small double bends, full set of pins and rolls, stirrup toolset special roller with nose to 10 / 250 mm, single pre-selectable angle, through pin placement, CW/CCW bending with full table rotation, foot pedal control.
Available options: Spiral radius attachment, Digital control panel: (Memory for bar shapes, automatic sequencing of bends in CW or CCW rotation, 99 bar shapes each up to 10 angles, bar counter, digital angle entry with +/- angle adjustment)

 Download LRB Brochure





PF-S Series
Heavy Duty Production Rotary Benders

PF-S Series
(PF34-S, PF40-S, PF45-S, PF55-S models)

Capacities to #11 – 1-3/8” – 35M Rebar

Up to 7.5 HP, 3 phase electrics required
CW/CCW bending with full table rotation, variable speed control (5-12 RPM) Dual adjustable retaining rails, easily adjustable for bar placement and fine tuning angles. Allows production of small double bends end rollers, dual foot pedal control, supplied with "Bending Arm" for large radius, full set of pins and rollers to 12” diameter, choice of control panels
Available Options:
9 x 9  Controller: Angles are set by pin placement.  Up to 9 pins can be placed around the turntable.  Operator sets the order of stops/angles on the control panel and the machine automatically sequences from bend to bend as pre-set
10/50 Controller: Full digital angle setting, with memory for bar shapes
Angles are entered from control panel and automatically sequenced (CW or CCW) Shapes are retrieved from memory as needed. Easy adjustment and fine tuning of angles as necessary

IMPORTANT: You can turn off the "9x9 or digital" control panel at any time with the machine reverting to the standard proven "pin" mechanical control system. The machine can still bend with full precision

 Download PF-S Brochure
 PF-S Attachments & Options





DAR Series
Heavy Duty Production Rotary Benders

DAR Series
(DAR 35, 45 & DAR 55 models)
Capacities to #14 1-3/4 45M Rebar
Up to 5.5 HP, 3 phase electrics required
CW/CCW bending with full table rotation, two speed control (5-10 RPM) Dual adjustable retaining rails, easily adjustable for bar placement and fine tuning angles. Allows production of small double bends end rollers, dual foot pedal control, supplied with "Optional Bending Arm Kit" for large radius (#14 - 45M), full set of pins and rollers to 10 diameter, Pre setting of up to 3 angles through pin placement and control lever placement.
Available Options: Spiral radius attachment, 2-4 adjustable rails, Digital control panel with memory (Memory stores up to 300 bar shapes, each with up to 10 angles, sequencing, easy correction of angles, cycle counter)

IMPORTANT: You can turn off the "digital" control panel at any time with the machine reverting to the standard proven 3 "pin" mechanical control system. Should the digital control system break for any reason or if the operator chooses not to use the digital system the machine can still bend with full precision.






CAL34 Hoop and Radius Bender
Capacity to #8 / 1

This machine can produce rings and spirals with steel bars to #8 / 1 / 25M  diameter, with adjustable radius from a minimum of about 7 and unlimited maximum. The rollers are made of heat-treated alloy steel. The machine can also work either in vertical or horizontal position and can operate in 2 speeds  8 and 16 RPM
CAL34 Hoop and Radius Machine
Capacity to #8 / 1 / 25M Rebar
Min. dia:  approx 7 depending on bar size, unlimited maximum ring. Manual adjustment of center roll determines finished ring diameter
Electrics: 5 HP, 3 phase required. Speed: 8/16 RPM
Dual drive rollers in hardened steel
Dual foot pedal controls
Supplied with safety guard with electric interlock
Input roller aids in feeding bending rolls at correct height
Adjustable pitch height for spirals, with locking handle
Supplied with wheels for portability
Machine weight:  approx 780 lbs / 350 kgs






88 Horizontal & Vertical
SPIRAL / HOOP / RADIUS MACHINE

complete with HYDRAULIC RELEASE DEVICE

The machine can work:
from coil up to 12mm (#3) in vertical
position & horizontal position.

Horizontal position cap: #2 to #10 (10M-30M) 
Vertical position cap:
#2 to #6 (10M-20M) 
Equipped with hydraulic release device, allowing to make partial hoops

Min. dia. of rings and spirals: 8"/10" (200/250mm)

Max. dia: no limit

Equipped with two hydraulic reduction units with 3HP motors
The release device is controlled by a hydraulic power

unit with 2HP motor. Two speed selector
Feed speed: 60-65ft' per minute

Overall dimensions: 41" x 55"x 48"
Weight: 1000 lbs

*The stand with rollers is an option






Portable Combination Rebar machines
Diesel and Gas models available

Gensco offers a great line up of portable "tow behind" diesel or gas driven rebar machines. Machines come complete with bending and shearing capability, single or multiple bars. 

With capacity up to #11 - (35M) 1-3/8", these machines come complete with easy operator controls, tow bar assembly,  rear tail lights, and more...

Available options include dual operator controls, spiral/radius attachments, extra tooling and formers, high quality liquid cooled diesel or gas engines, etc.

Gensco can build the machine exactly how you like it!

 Click Here to Download Brochure





COMPLETE CUSTOM SHEARLINES
c/w Alligator or Guillotine shears

Gensco can offer the following Shearline equipment. If you do not see a product here, please call or e-mail us, because we can fabricate any type of conveyor you are looking for.

SHEARLINES:

  • PRELOAD CONVEYORS
  • INTERMEDIATE TABLES
  • GAUGING CONVEYORS
  • SINGLE & DOUBLE TIER STOCK RACKS
  • SINGLE SIDE AND DOUBLE SIDED POCKETS
  • VIBRATORY TABLES
  • EXTENSION TABLES
  • TRANFER TABLES

CONTROL CONSOLES: PLC, Digital
SHEARS:
Gensco can supply any kind of rebar conveyor equipment you need, from standard sizes to custom lengths, and from complete lines down to individual components. Custom-made rebar equipment designed and built to customer needs.

 Click here to download brochure



 

   

©2012 Gensco Equipment (1990) Inc.

i