| |
|
|
|
TYB-HD26
Single Phase Portable Rotary Table Bender
Capacity: #6 – ¾” – 20M
2 x #5(15 mm), 3 x #4 (12 mm)
Single phase 115 volts, or as required
c/w foot pedal control, rollers, split pin
stirrup assembly. Simple slide block mechanism
allows the operator to quickly and accurately adjust and pre-set up to 2 angles.
Adjustable from 0 – 180 degrees, maximum
single CCW bending direction Machine weight approx. 165 lbs
 Download TYB and RC series brochure
 Click here to see Video of this machine
|
|
|
TYB-HD35
Single Phase Portable Rotary Table Bender
Capacity: #8 – 1” – 25M
c/w dual foot pedal controls, 2 drive rollers
with bearings for rotation, and 3 center rollers, 65, 95,
& 125 mm diameter (2.5”, 3.75” & 5” approx)
Split pin stirrup assembly with 2 bending radii.
Bars are not dragged through machine, but held
firmly during bending. Adjustable hold back device.
Simple slide block mechanism allows the
operator to quickly and accurately adjust and
pre-set up to 2 angles.
Adjustable from 0 – 180 degrees, maximum
single CCW bending direction
Bends 1 x #8, 2 x #6, 2 x #5, 3 x #4, 4 x #3 Machine weight approx. 325 lbs
Download TYB and RC series brochure
Click here to see Video of this machine
|
|
|
COMBINATION REBAR CUTTER / BENDER
TYB bender with RC series cutting tool
Single Phase Operation, 115 volts, 60 Hz
Capacity: # 8 – 25M – 1” High Tensile Grade 60 Rebar or multiples of smaller bars.
Includes TYB-HD35 Table Bender with RC-25 Cutter
Mounted on common steel stand.
Each tool can be used independently and removed from stand.
(Requires 2 115volt electrical connections)
Bending & Cutting:
TYB series bender model HD26 or HD35 (as above) System Weight (bender, stand, shear): approx 435 lbs
Download RC series brochure
|
|
 |
PROCUT 12 series
Portable Cutting Tool (Electric or Battery powered
PRO-CUT 12 series
Optional HANDLE AT REAR or TOP
Integrated Overload Valve
Capacity: 1/2" / 12 mm steel rounds
Weight: 15 lbs / 6.7 kgs
Power: 115 volts, 60 Hz
Battery Powered Option (18V Dewalt w/charger)
c/w carry box, etc.
|
|
 |
SC-16 & SC-20
PORTABLE REBAR CUTTER
SILVERCUT 16 HYDRAULIC CUTTER
Tabletop and portable, self contained
hydraulic system - integrated overload valve, guard over head
Cuts maximum 5/8” / 16 mm
Unit weighs approx 16 lbs / 7.1 kgs
120 volts, 60 Hz
c/w carry box, etc.
SILVERCUT 20 HYDRAULIC CUTTER
Tabletop and portable, self contained
hydraulic system - integrated overload valve, guard over head
Cuts maximum 3/4” / 20 mm
Unit weighs approx 22 lbs / 10 kgs
120 volts, 60 Hz
c/w carry box, etc.
|
|
 |
RC-25 & T-32
Portable Rebar and Rod Cutting Tool
RC-25 Rebar Cutting Tool
Table top, portable hand held cutter
Capacity: #8 – 1” – 25 mm round
with self contained electro-hydraulic system, 115 volts
w/protection cover over cutting head,
steel carry box, spare blades, oil, etc.
Weight: approx. 50 lbs
T-32 Rebar Cutting Tool
Table top, portable hand held cutter
with self contained electro-hydraulic system, 115 volts,
pressure relief valve, guard over head
Capacity 1-1/4” / 32 mm mild steel,
1” / 25 mm Stainless or High Tensile Rebar
Cutting Force approx 55 tons
Unit weight approx: 60 lbs / 27 kgs
Click here for RC25 video
|
|
|
TYR-HD25 Portable Spiral / Ring Machine
SPIRAL / HOOP / RADIUS MACHINE
Capacity: #6 – 20M – ¾”
2 HP, 115 volts single phase
Weight: approx 485 lbs
3 Adjustable Bend Rollers, Special Center Roller
Speed: Approx. 30 RPM
Minimum bend diameter: Approx. 6”
(depending on bar size)
Unlimited maximum. Adjustable plate for pitch height of spirals.
Click here for the video
|
|
|
|
|
