| |
|
|
 |
| |
|
Choose from the variety of cable stripping / shredding solutions available at Gensco:
 |
|
|
|
 |
|
| |
|
| |
CSX-001 Cable Stripper
Capacity from 1/16 to 2-3/8 diameter
"Don't be fooled by Cheap Imitations"
The ORIGINAL CSX-001 is the most popular heavy
duty bench top cable stripper in the world
Capacity from 1/16(2mm) to 2-3/8 (60mm) diameter
Simple and economical, the "Original Moneymaker"
for scrap operations. Cut speed approx 60 ft./min
Weight: approx 90 lbs. (40 kgs)
Electrical Requirement:
Single phase 110volt 50/60Hz
|
| |
|
|
|
| |
|
|
CSX-1010 Cable Stripper
Capacity from 1/16 to 3 diameter
The CSX-1010 is a heavier machine, with a larger
capacity from 1/16(2mm) to 3(75mm) diameter,
faster cutting speed and Forward/Reverse drive
Electric start and stop control.
Cut speed approx 80 ft./min, weight 175 lbs.
Electric Requirement:
Single or Three phase 220 volt, 50/60Hz
"Don't be fooled by Cheap Imitations"
|
| |
|
|
|
| |
|
|
CSX-2010 Cable Stripper
Capacity from 1/16 to 4.5
The Scrap Yard Standard in cable strippers!
For heavy duty applications the CSX-2010 has a capacity range from 1/16(2mm) to 4 ½(115mm) diameters
*Two different cutting heads, with a Top and Bottom cutting system,
**Full forward and reverse capability plus, steel guide for large diameter cables and automatic safety braking system
Pulls up to 110 feet/min, for production stripping
Electric Requirement:
3 HP, 3 phase 220/440/575 volt 50/60Hz
Machine Dimensions:
Length: approx 30 / 760 mm
Width: approx 29 / 730 mm
Height: approx 47 / 1200 mm
Weight:: approx 780 lbs / 355 kgs
|
| |
|
|
|
| |
|
|
ADDAX Heavy Duty Cable Stripper
3/8" (10mm) to 6-1/4" (160mm)
ADDAX 15 Heavy Duty Cable Stripping Machine
Suitable for armored cables
Capacity: 3/8 to 6-1/4 cables (10 to 160 mm)
Speed: approx 105 feet per minute (32 M /min)
Equipped with dual motor and gearbox units
each driving one of the feed rollers.
Oversize feed rollers with teeth, quenched &
tempered & designed for intensive work with steel
armored cables. Supplied with emergency safety
braking system, guards, working table & full
adjustments for cable size. Supplied with electrical
starting panel with overload protection,
forward and reverse controls
Electrical:15 HP electrics, 3 phase, 60 HZ
voltage to be specified
Length: approx 59 / 1480 mm
Width: approx 52 / 1300 mm
Height: approx 62 / 1560 mm
Weight:: approx 2860 lbs / 1300 kgs
|
| |
|
|
|
| |
|
|
Cable Granulation & Separation Plants
Guidetti srl
GUIDETTI SINCRO & W.I.R.E. SYSTEMS
A complete solution for processing your scrap wire and cable plus many other materials
Placed next to your cable stripper it allows you to efficiently
process a wider range of materials including small diameter wires and un-strippable material.
The SINCRO plants have been designed to be able to recycle eletric cables by grinding cable and dry-separating copper or aluminium from plastic or rubber. They are fully soundproofed and equipped with a de-dusting system (Emission of dust to the environment).
Machine Highlights:
► Mounted on common steel base for easy portability.
Easy to move, place and install.
► A choice of screen sizes (granule size) depending on material
► Small dimensions with low power requirements
► Install anywhere: Fully soundproofed enclosure and dust collection system
► Easy and rapid maintenance
► No extra handling of material: Granulated material is automatically transported by pneumatic conveyor
► Increase your throughput and handle a wider range of material by incorporating a pre-chopper or shredder before your SINCRO
|
| |
|
|
|
| |
|
|
GSX Single Shaft Shredders
Wire, Cable, PVC, Nylon, Rubber, Wood
GSX Series Shredders suitible for Wire Cable, Film, Carpet, Textiles, Woven Material, Plastics (ABC, PVC, PC, Nylon) and more!
shredder highlights include:
- High Speed Milling and shredding
- Low noise level and low power consumption
- Symmetry-rotating-blade-design, provides possibility for rotating blades 4 times
- Easy to operate,proven long lifespan
- Hydraulic feeding system, easy adjustment of feeding speed and pressure for different materials
- Screen sizes for material uniformity,
standrad sizes 3/4" - 1.5" (19mm - 50mm)
- Easy screen adjustment and replacing with a Pneumatic buffer rod, unbolting brackets, reduces labour and and enhances safety
- Sorting Screens/Grids available: 1/2" - 4" holes
|
| |
|
|
|
| |
|
|
GSX2260 Single Shaft Cable Shredder
Sorting Screen installed for shred uniformity
GSX-2260 Highlights Include:
Feed Opening: 600mm x 790mm (24" x 31")
Rotor shaft diameter: 220mm (10")
Rotor shaft size: 500MM (20")
Rotor speed: 83 RPM
Rotating blades: 1" x 28 pcs.
Hydraulic ram: 500mm (20")
Screen size: 20mm - 40mm (3/4" - 1.6")
Electrics: 25 HP 220/440V three phase, 60 Hz.
Approx. Dim: 1785 x 1200 x 1800(71" x 47" x 72")
Weight: 1500 kg or 3300 lbs.
Process approx. 450 lbs - 900 lbs per/hour
**Throughput subject to change with material**
|
| |
|
|
|
| |
|
|
GSX4080 Single Shaft Shredder
Sorting Screen installed for shred uniformity
GSX-4080 Highlights Include:
Feed Opening: 800mm x 1230mm (32" x 50")
Rotor shaft diameter: 400mm (16")
Rotor shaft size: 850mm (35")
Rotor speed: 83 RPM
Rotating blades: 1-3/4" x 46 pcs.
Hydraulic ram: 850mm (35")
Upper and Lower fixed blades
Screen size: 20 - 40mm (3/4" - 1.6")
Electrics: 50 HP 220/440V three phase, 60 Hz.
Approx. Dim: 2700 x 1570 x 2200(107" x 62" x 87")
Weight: 4700 kg or 10400 lbs.
Process approx. 2200 lbs - 3300 lbs per/hour
**Throughput subject to change with material** |
| |
|
|
|
| |
|
|
GSX40120 Single Shaft Shredder
Sorting Screen installed for shred uniformity
GSX-40120 Highlights Include:
Power: 75 HP (220/440/575 volt) three phase
Siemens motor with hydraulic fluid coupling
Speed: 85 RPM
Feed opening: 55 x 47 (1400mm x 1200mm)
Rotor shaft dia.: 16 (400mm)
Rotor shaft size: 45 (1150mm)
Rotating blade size: 1 3/4 (35mm) x 68 pcs
Upper Fixed blade size: 45 (1150mm) x 6 pcs
Lower Fixed blade size: 45 (1150mm) x 6 pcs
Approx. machine dimensions: 115 x 83 x 87
(2920mm x 2100mm x 2200mm)
Weight: 14300 lbs (6500 kgs)
Process approx. 3000 lbs - 5000 lbs per/hour
**throughput subject to change depending on material** |
| |
|
|
|
| |
|
|
PMG-N Cable Shredder
Single Shaft with Screen
PMG Highlights Include:
Power: 25HP-75HP (220/440volt) three phase
Speed: 100 RPM
Feed opening: 32 x 50 (800mm x 1300mm)
Rotor shaft dia.: 16 (400mm)
Rotor shaft size: 35 (850mm)
Rotating blade size: 1 3/4 (35mm) 46 pcs
Upper Fixed blade size: 35 (850mm) 2 pcs
Lower Fixed blade size: 35 (850mm) 2 pcs
Approx. machine dimensions:
155 x 62 x 82 (3930mm x 1570mm x 2080mm)
Weight: 4535 lbs (2060 kgs)
c/w one sizing screen/grid and standard
spare parts kit
a) approx. 8 feet c/w magnetic head pulley at the top
b) Integrated feed speed control
c) Optional: Magnetic Over Band
|
| |
|
|
|
|
|
