All LSI Series models operate from a remote hydraulic power pack operating to a maximum of approx. 7500 PSI. Please note that for those models with electric push button control the pump must have an electric operated valve. We offer a complete package of tool with hose and suitable pump.
All of the above tools are specifically designed as scrap and demolition cutters for the recycling industry, suitable for rough usage and high frequency operation. The “LSI” recycling tools have been reinforced mechanically for long life, the available electric push button controls offer high frequency reliability, plus we have reduced the working pressure from 10000 PSI (rescue tools) to 7500 PSI for less wear and tear and greater cylinder and seal life.
In the highly industrialized countries there is an increasing requirement to recycle old products or to dispose of them as environment friendly as possible. LUKAS offers a range of hydraulic cutters specially designed for all kind of dismantling work on this field
The LSI 200 is the ideal cutter for mobile application in scrap yards, construction sites sites or in buildings. Can also be used for cutting work under water. Highlights include: Light weight, precise thumb operation in any working position through unique LUKAS Star grip valve, regrindable blades, can be optionally equipped with blades in different shapes, highly durable sliding plates, dirt protection.
70,000-80,000 Lbs of cutting force Recommended application: With straight blades or combi blades:
• Recycling of household goods
• Cutting of material on junk yards
• Cutting of flat material With curved blades: • Recycling of cars, Recycling of cables, dismantling or renovation work in buildings
Complete with 12" hose pair
Recommended power unit:
Electric (115V)
PO6-LSI-10-50
Gas (Honda) G06-LSI-10-50 Accessories include: Steel transport cart, various blade options, gas & pneumatic power units, spring loaded balancer, extention & connection hose, etc.
The LSI 400E is a Lightweight cutter with aluminium cylinder body for high cutting frequency and mobile application. The tool is hand operated: Simply press push buttons to open or to close the blades. Highlights include: Long service life, Extremely long lasting control valve, regrindable blades, requires only a minimum of maintenance
70,000-80,000 Lbs of cutting force Recommended application:
• Cutting work in an production line
• Recycling of cars
• Recycling of cables
Complete with 12" hose pair, electric control cable. Opening and closing of the cutter blades is controlled by solenoid valves on the power unit. Those valves are switched by the operator via remote control buttons on the tool.
Recommended power unit:
Electric (115V)
PO6-LSI 510 Accessories include: Steel transport cart, various blade options, spring loaded balancer, extension & connection hose, etc.
LSI 500V or 500E Series Heavy Duty - Manual or Electric Activation
The LSI "Monster" 511 and 501 are very rugged cutters with aluminum cylinder body for high cutting frequency and mobile applications. Tools odder double the cutting force compared to the other series. The tool is hand operated: Simply rotate star grip valve or press push buttons to open or to close the blades. Highlights include: Long service life, Extremely long lasting control valve, elecrtric push button option, regrindable blades, requires only a minimum amount of maintenance 120,000-155,000 Lbs of cutting force Recommended application:
• Cutting work in an production line
• Recycling of scrap ferrous metal, cars, etc.
Complete 12" hose pair, optional electric control cable. Opening and closing of the cutter blades is controlled by solenoid valves on the power unit. Those valves are switched by the operator via remote control buttons on the tool.
Recommended power unit: PO6-LSI 10-50 or 510
Accessories include: Steel mobile cart, various blade options, spring loaded balancer, extension & connection hose, etc.
LSI 600 or 600E Series Hand Held or Remote Activation
The LSI 600 is a very rugged cutter with steel cylinder body for high cutting frequency and portable application. The tool can be operated remotely Highlights include: Long service life, Extremely long lasting, regrindable blades, requires only a minimum of maintenance Recommended application:
• Cutting work in an production line
• Recycling of scrap ferrous metal, cars, etc.
Can be supplied extension hoses, electric control cable, or remote cable package. Opening and closing of the cutter blades is controlled by oil pressure and flow from a power unit. Those valves are switched by the operator via remote control buttons on the tool.
Recommended power unit: PO 6-LSI 10-50
(PO 6-LSI510 w/ 600E model) Accessories include: Steel transport cart, various blade options, spring loaded balancer, connection hose, etc.
LUKAS LSI 531 CC
LUKAS LSI 531 CC Concrete Crushing & Rebar Cutting
HYDRAULIC CUTTING TOOL FOR CONCRETE
CRUSHING & REBAR CUTTING - Special tips Equipped with manual twist valve on tool for open/close functions, guard for cutting head, 12" dual line hydraulic hose with Quick Connects,
optional electrical wire with push button, etc.
Crushing force approx. 18,000 lbs at tip
Cutting force approx 150,000 lbs in throat
Opening at tips: 12" (320mm) Crushes concrete type B 35 up to 7.7”
Cuts reinforcing grade 60 steel bar up to 1.1” Aluminum Body with durable steel components and replacable tips
Carrying Handle on Tool
Weighs approx 50 lbs
Requires dual acting hydraulic pump
model P(G)O6-LSI-10-50 pump
Lukas P06-LSI-10-50 Hydraulic Power Unit (LSI2xx, 5xx)
LUKAS RADIAL PISTON PUMP
Model P06-LSI-10-50
Dual stage hydraulic pump with high oil flow for quick tool operation- 115 volts, 60 Hz, single phase, 2 HP, 3000 RPM - Pressure adjusted to a maximum of 7500 PSI / 500 BAR
Tank Capacity: 10 L - 2.6 U.S. gallons
Optional 25L - 6.6 U.S. gallons
c/w valve block with drain valve for mounting hydraulic hoses
For use with LUKAS connection hoses.
(quick disconnects optionally available)
Weight approx. 96 lbs **Also available GAS or Pneumatic driven power, Lukas Aluminum carry frame w/mounting kit, Steel transportation cart**
LUKAS P06 - LSI - 510
Lukas P06-LSI-510 Hydraulic Power Unit (LSI4xxE, 5xxE, 6xxR)
LUKAS RADIAL PISTON PUMP
Model P06-LSI-510
Dual stage hydraulic pump with high oil flow for quick tool operation - 115 volts, 60 Hz, single phase, 2 HP, 3000 RPM - Pressure adjusted to a maximum of 7500 PSI / 500 BAR
Tank Capacity: 10 L - 2.6 U.S. gallons
LUKAS RADIAL PISTON PUMP
Model P06-LSI-520
Dual stage hydraulic pump with high oil flow for quick tool operation - 230 volts, 60 Hz, single phase, 2 HP, 3000 RPM - Pressure adjusted to a maximum of 7500 PSI / 500 BAR - Tank Capacity: 25 L - 6.6 U.S. gallons
Pumps c/w valve block with drain valve for mounting
hydraulic hoses or couplers
For use with LUKAS connection hoses.
(quick disconnects optionally available)
Weight approx. 100 lbs **Also available Steel transportation cart**
F-1 Series Cutting Tools - Available in Electric, Battery and Gas Powered Versions
Dual acting cylinder. Powered close and open, Manual twist valve located at rear of tool, carry handle, hydraulic hoses w/ quick connection, etc.
Cut Force 130N: 24 tons - (53,000 lbs)
Cut Force 145N: 30 tons - (60,000 lbs)
Cut Force 170N: 78 tons - (171,000 lbs)
Blades opening: approx 5” / 130 mm
Weight:130N (26lbs) 145N (39lbs) 170N (53lbs)
SCRAP KIT: Including tool, Hydraulic Power Pack VDS700 G28 w/cooler (115 Volt power required),
20 foot dual line hydraulic hose with quick couplers, steel carry/transport cart on wheels
*Balancer/Bracket extra* *Gas and Diesel Power Optional
T22 Cable Cutting Tool
T22 - Cable Cutting Tool: Blade opening up to 3.5 inch
Gensco offers the T22 Hydraulic Cutter Completely self contained tool with handle
and "KEEPER" on blade. Allows blades to stay tight and move straight through material without spreading.
Suitable for wire and cable, etc. Blade Opening: 3.5 inches (90mm)
Cutting force: 48000 lbs (22tons)
Pressure: 10000 psi (700 BAR)
Weight: 30lbs (15.4 kgs)
Dimensions: 26"x9.5"x9.5" (650x240x240mm)
115/230 volt, single phase option
TC 55F42 DE Cutting Tool
TC 55F42 DE Cutting Tool Electro-Hydraulic WIRE ROPE cutter
Gensco offers the TC 55F42 DE HYDRAULIC CUTTER FOR WIRE ROPE
Self contained hydraulics. No pump required Capacity: 2” or approx 55 mm Cutting force: 38000 lbs (19tons)
Pressure: 9000 psi (600 BAR)
Double acting hyd cylinder–Power both ways
Head opens to cut in middle of long lengths
Unit weight approx 35 lbs (16kgs)
Dimensions: 26"x9.5"x9.5" (650x240x240mm)
115/230 volt, single phase option
