Serving Recycling, Electrical Utility & Construction Industries Since 1919

Scrap and Demolition Grapples

Models for every capacity and application

Hydraulic, cable and electric styles suitable for attaching to any model excavator, loader or crane. For all ferrous, non-ferrous and solid waste applications. Scrap yards, Shipping ports, Steel foundries and mills. Special combination grapples with magnets. Grapples for magnet cranes. Clamshell Buckets & multi-purpose Demolition/Sorting grabs.


PM Light Duty Hydraulic Scrap Grapple


red hydraulic grapple
hydraulic scrap grapple moves scrap car
hydraulic scrap grapple moves scrap wood

Light Weight Orange Peel Grapple for Scrap Handling

PROVEN QUALITY AT AN AFFORDABLE PRICE!

OUTSTANDING HYDRAULIC GRAPPLES SUITIBLE FOR A WIDE RANGE OF MATERIALS

Capacity: range of .35 to .60 cubic yards equipped with 5 or 6 tines / cylinders, Recommended for 2 to 16 ton machines. Supplied with mechanical knock-about (swivel attachment). The weight of the PM series ranges between 650 to 1500 lbs., depending on the finger type. Optional internal hydrauilc rotator available.
 

PM-3 (5 or 6 tine/finger options) .35 cu. yd. cap.
PM-4 (6 tines/fingers) .50 cu. yd. cap
PM-7 (5 tines/fingers) .60 cu. yd. cap.


RP "Light Duty" Hydraulic Scrap Grapple


red hydraulic five tine scrap grapple
gensco scrap grapple on boom attachment
red hydraulic five tine scrap grapple moving scrap metal

Light Duty Orange Peel Grapple for Scrap Handling

A TOUGH SCRAP GRAPPLE IN A SMALL PACKAGE!

OUTSTANDING HYDRAULIC GRAPPLES SUITIBLE FOR A WIDE RANGE OF MATERIALS. SUITABLE FOR ALL TRUCK MOUNTED CRANES OR SMALL EXCAVATORS

The RP Grapple is designed to work with cranes that range in weight from 2 to 16 tons. The grapples have 4 or 5 fingers with three different finger styles, depending on the application of the grapple. The RP has a 5/8 to 1/2 cubic yard capacity and a rated load of 2.5 tons. The weight of the RP ranges between 850 to 1200 lbs., depending on the finger type. Optional internal hydrauilc rotator available.

RP250 4P (4 tine/finger) .35 cu. yd. cap.
RP250 5P (5 tine/finger) .35 cu. yd. cap.
RP500 4P (4 tine/finger) .50 cu yd. cap.
RP500 5P (5 tine/finger) .50 cu yd. cap.


PR "LOW PROFILE" Hydraulic Scrap Grapple


RED SCRAP GRAPPLE
red hydraulic five tine grapple moving scrap metal
red hydraulic five tine grapple moving scrap metal

"Low Profile" Hydraulic Orange Peel Grapple for Scrap Handling

THE MOST POPULAR LOW PROFILE SCRAP GRAPPLE IN THE WORLD!

LOW PROFILE DESIGN WITH FULL CYLINDER PROTECTION

The PR Grapple is designed to work with cranes that range in weight from 15 to 33 tons. The grapples have 4 or 5 fingers with three different finger styles, depending on the application of the grapple. The PR has a 1/2 to 3/4 cubic yard capacity. The weight of the PR ranges between 1800 to 2700 lbs., depending on the finger type. Optional internal hydrauilc rotator available.

PR01/5-40 (5 tine/finger) .50 cu. yd. cap.
PR01/4-60 (4 tine/finger) .75 cu. yd. cap.
PR01/5-60 (5 tine/finger) .75 cu. yd. cap.
PR02/5-40 (5 tine/finger) .50 cu. yd. cap.
PR02/5-40 (5 tine/finger) .75 cu. yd. cap.


RV "Heavy Duty" Hydraulic Scrap Grapple


red hydraulic five tine grapple
red hydraulic grapple moving scrap metal
red hydraulic grapple moving scrap metal

Rugged Hydraulic Orange Peel Grapple for Scrap Handling

FOR THE HEAVIEST OF SCRAP YARD AND MILL APPLICATIONS!

Heavy Duty Scrap Handling Grapple

The RV Grapple is designed to work with cranes that range in weight from 22 to 50 tons. The grapples have 4 or 5 fingers with four different finger styles, depending on the application of the grapple. The RV has a 1/2 to 2.75 cubic yard capacity. The weight of the RV ranges between 3200 to 7000 lbs., depending on the finger type. Optional internal hydrauilc rotators available.

RV500P (4 or 5 tine/finger) .65 cu. yds
RV600P (4 or 5 tine/finger) .75 cu. yds
RV800P (4 or 5 tine/finger) 1 cu. yds
RV1000P (4 or 5 tine/finger) 1.3 cu. yds
RV1500P (4 or 5 tine/finger)  2 cu. yds
RV2000P (4 or 5 tine/finger) 2.75 cu. yds


PH & RVM Grapple with Scrap Magnet


Small Hydraulic Orange Peel Grapple with Built-In Magnet

A SERIES OF SPECIALLY DESIGNED COMBINATION GRAPPLES WITH MAGNETS!

PH or RVM Attachments.  The perfect scrap handling tool for truck mounted cranes, small excavators, small loaders, etc.
Magnets run off 24 or 230 Volts DC - Use the existing truck or crane battery for 24V system! NO NEED FOR GENERATORS.  Control systems included

Plus: Specially designed tines/fingers that fold-up and tuck away allowing for magnet to reach into corners of a truck for full cleaning.  Weight of attachments range from 900 - 3000 lbs.  All models c/w 24"-32" round scrap magnet. Recommended machine sizes from 5-18 ton.

PH/X-25 (4 or 5 tine/finger) .35 cu. yd. cap.
PH/X-40 (4 or 5 tine/finger) .50 cu. yd. cap.
RVM-350 (4 or 5 tine/finger) .65 cu. yd*
RVM-500 (4 or 5 tine/finger) .65 cu. yd*
*24V or 230V DC Magnet Option*


MG Series Grapple with Scrap Magnet


red scrap grapple with magnet
red scrap grapple with magnet moving scrap metal with magnet
red scrap grapple with magnet moving scrap metal

Hydraulic Orange Peel Grapple with Built-In Magnet

HEAVY DUTY COMBINATION HYDRAULIC SCRAP GRAPPLE WITH 230VDC MAGNET BUILT-IN!

The MG Series Grapple with Magnet is designed to work with cranes that range in weight from 16 to 50 tons. The grapples have 4 or 5 fingers with three different finger styles, depending on the application of the grapple. The MG series are for extreme scrap operations and have 1/2 to 2 cubic yard capacities with up to 50" 230VDC diameter scrap magnets. magnets are bolted into the frame allowing the user to easily remove should they require maitenance. The attachment can be used with or without the magnet.  Hydraulic cylinders are oversized and fully guarded and protected by steel enclosures.  The weight of the MG ranges between 3480 to 7200 lbs., depending on the finger type. Optional 360 degree internal or external hydrauilc rotators are available.  DC generating systems available.

MGL/5-60 (5 tine/finger) .75 cu. yd. cap.
MG/4-80 (4 tine/finger) 1 cu. yd. cap.
MG/4-100 (4 tine/finger) 1.3 cu. yd. cap.
MG/4-150 (4 tine/finger) 2 cu. yd. cap.


RSM DEMOLITION GRAB WITH SCRAP MAGNET


Magnet Grapple
DEMOLITION GRAB WITH SCRAP MAGNET

Sorting Demolition Grapple with Built-In Magnet

Gensco offers the RSM (Demolition Sorting Grapple with Scrap Magnet Built-in) as one of Gensco's most innovative attachments. This attachment combines the versatility of our RS Demolition Grapple with a durable magnet built in.  With its flexing versatility and built in hydraulic rotation, this attachment has the ability to carefully sort material and separate valuable ferrous steel without changing to another attachment. The RSM can be handled safely reducing labor costs, increase your return on ferrous metal.

The RSM combination Demolition Sorting Grapple with Magnet is available for all classes of machines.

Highlights & Features:

• Available With 270 degree hydraulic rotation
• Heavy Duty HARDOX construction, abrasion resistant
• Replacable bolt on HARDOX tip blades
• Available With Pin On Lugging Or Quick Coupler attachment
• Heavy Duty 24V or 230V DC Magnet for Lifting Ferrous Steel