AUTO RECYCLING AND DEPOLLUTION EQUIPMENT

Vehicle depollution equipment for ELV cars - built to the highest standards in the industry. A full range of purpose-built equipment and auto drain systems offers solutions for any size or type of operation.

Options include:

• ELV depollution pneumatic systems for safe and efficient recovery of oil, water, fuel, and other fluids
• A variety of lifts to integrate with auto drain systems
• Smart Drain systems designed to work with pre-existing mechanical shoplifts and rigid stands
• Complete state-of-the-art lift and drainage systems
• Compact structures that offer both economic and efficient solutions

Whether you process a few cars per day or a mountain of scrap cars, we have the right solution for you.

 

Show Less

The right handheld cutters for recovery of valuable auto parts

Gensco offers a complete line of ELV car wrecking equipment for dismantling and the recovery of engines, catalytic converters, parts, and axles. The correct dismantling equipment saves time and improves safety and comfort during operation.

• Hydraulic car tilting lifts with elevator lifts and fixed platform options provide a safe means of dismantling engines and axles with maximum efficiency
• Dismantling shears include a unique catalytic converter cutter designed with a spear tip blade that allows the operator to rest the cutter on the catalytic device keeping it stable during cutting
• A complete line of curved and straight cutting tools ideal for material separation from end-of-life vehicles

Show Less

Safety, Speed and Convenience while dismantling and draining vehicles

With four models to choose from, Gensco offers state-of-the-art hydraulic car tilters that both tilt and lift. This provides a convenient means to safely streamline auto dismantling and vehicle depollution. Tilt-only or tilt-and-lift options are available to meet your budget and operational needs.

Hydraulic Car Tilters are an ergonomic solution that allows operators to stand upright while removing heavy and valuable mechanical automotive parts. A hydraulic locking locking clamp holds the vehicle securely in place while in a tilted position.
 

Show Less

Compact, Safe, Stable, and Powerful

These compact hydraulic car lifts are designed for depollution and dismantling of end-of-life vehicles. Designed for ultimate access to mechanical parts and fuel and other fluids. All models come with 4 built-in brake fluid suction hoses positioned near each wheel for convenient brake fluid recovery. Options for non-slip platforms (BF MODELS) and lift capacities options are available. 

These are an ideal setup for auto recycling operations looking for small footprint solutions and operations setting up multiple depollution and dismantling stations. 
 

Show Less

State-of-the-art Car Dismantling Automation at its fastest

The Car dismantling robot with radio controls is the fastest way to dismantle cars with simple and safe actions, thanks to the use of the remote controls.

The equipment consists of a continuous revolving platform and a hydraulic vise, to be fixed without masonry work. It guarantees a precise and powerful separation.

Show Less

Maximize ROI on car dismantling by recovering high-value metals.

1. Recover Palladium, Platinum, and Rhodium from catalytic converters using our DTX300 ALLIGATOR SHEAR, with hydraulic hold-down 
2. Easily remove vehicle wire harnesses, fenders, radiators, axles, and other parts containing valuable metals, with the GE R580 CAR DISMANTLING GRAPPLE
3. Recover bare bright copper and aluminum with, state-of-the-art wire recycling machines, SINCRO WIRE GRANULATOR / SEPARATOR SYSTEMS 

Show Less

Portable or stationary rim crushers for cars and trucks

Opening:

• Up to 32"

Features

• AR-400 crushing beams with exclusive wear pad design and industry-leading durability
• Mounted on a heavy-duty trailer with wheel guards, ball hitch, brake lights, etc.
• WC500
  • Features a triple ram design making a clean quick sweep of rims in one fast pass
  • 32" opening
  • 20-second cycle time 
  • Powerful crushing force
• TRC460
  • Boasts a beast-like 6" crushing ram for crushing truck rims with ease
  • 35-second cycle time

Options

• 35HP diesel or 25HP 3-Phase electric

Show Less

For easy separation of rusted rims from car and light truck wheels

Opening:

• 36" 

Features:

• Made in the USA
• Crushes up 120 wheels/hr
• Equipped with towing
• Single crush stroke for quick and easy processing
• Two-handle valve system for safe operation
• Electric start

Options:

• 18 HP V-Twin B&S Commercial Gas Engine
• Diesel Engine
• Electric Power
• Safety Cover
• Roller Table

Weight:

• 2250 lbs

Show Less

Safe, fast, stationary, and electric

• Up to 31.5"

Features:

• Separate the tire from the rim easily and safely
• Reduces steel rim volume preparing it for melt in charging furnaces
• Crushes between 80-140 wheels/hr (7000 to 12,125 lbs/day)
• Quiet electric operation

Options:

Show Less

Simple, Safe, and Economical Tire Removal from Steel and Aluminum Rims

The SG2 can pop out 60 to 90 Rims per hour, approximately 100 lbs of steel a day for a quick Return on Investment (ROI).  The machine can be modified to notch or remove a piece of aluminum so the rim cannot be used


Capacities:

• Rim: 12-18"
• Wheel: 25"

Max Working Pressure:

• 150 BAR / 2175 PSI

Cycles per Hour

• 80 - 90

Max Hydraulic Flow:

• 3-4 Gallons/min 

Features:

• Easily separate tire from rim
• Breaks aluminum rims rendering them useless
• 20-second cycle time
• Approximately 100 wheels/hr
• Safe operation
• Easily transportable with forklift
• Simple manual controls
• Compact machine suitable for confined spaces

Options:

• 5HP Motor (220v Single or Three Phase)
• 5HP Motor (220v with Portable Gas Generator)

Weight/ Dimensions:

• 1325 lbs
• 40 x 28 x 91"

Show Less

These compact Gas and Diesel Caddies are designed for the depollution of end-of-life vehicles.

With a 220L steel storage tank, these easy-to-use systems suction 50L/min of fuel from ELVs. Fuel can be extracted while the vehicle is on a rack using an optional pneumatic drill/punch gun for further efficiency.

Filtered fuel can distributed at 70L/min while impurities and water are sent for waste. 
 

Show Less

Recover and Recycle Multiple Refrigerants in One Easy System

RFB 2 performs a complete AC refrigerant recovery and storage cycle very quickly. The entire process is controlled by an electronic control unit; the operator only has to deal with the preliminary connection between the car and the air-conditioning system.

• One unit for multiple refrigerant gas recovery and storage cycle
• Process guided by LCD control unit
• Integrated digital scale determines when cylinder is at capacity
• Recovered gas quantity measured and recorded
• Circuit filtering and cleaning at each cycle

Automation ensures safety and a record of volumes recovered per vehicle. The integrated electronic scale displays a warning signal as cylinder is reaching capacity. The separator and filtration system cleans the recovered gas and expels impurities along with the oil in each cycle. Gas can be reused and the system remains clean to avoid cross-contamination between refrigerant types.

Panel mounted

• Safety valve/Manual exhaust valve for non-condensable gases
• Lp/Hp panel taps
• 4.7” display

On display

• 27 languages software
• Digital reading of the inlet pressure
• Alarm on display if cylinder is too full
• Filter maintenance warning
• Reset at cylinder change

Functionality

• Automatic compressor oil separator
• Internal filter drier
• Automatic exhausted oil drain
• Couple of quick couplings R134 (Lp/Hp)

Optional

• Printer (panel with pre-cut)
• R134 and R1234yf recovery cylinder + R1234yf quick couplers

Show Less

The optimal solution for all cars with air conditioner

This mobile and compact unit will clean and recover freon including R12, R134a, and (using a special adapter) R1234YF making this an ideal freon recovery unit for all cars. Impurities are separated and expelled with the oil.

Technical Features

• Portable unit
• Recuperate every kind of CFC and HCFC refrigerant
• Recovery and automatic oil discharge
• Power supply: 220 V 50 Hz single phase and 115 V 50/60 Hz
• 1/3 hp hermetic compressor with automatic oil recovery, recovery capacity 0.9 lb/min
• Dimensions: 13” x 9.8” x h. 30.3”
• Weight: 27.3 lb
• In compliance with CE directive 2000/53 on the treatment of refrigerant gasses in case of demolition of the vehicle

Show Less

Quickly & easily destroy car, truck, & motorcycle license plates

Features:

• Simple and safe operation
• Shredding cycle-time for one plate is up to10 seconds
• Enclosed grinding system
• Shredded material is safely collected inside the machine

Options:

Digital camera system to capture and record shredding process to verify destruction (recording stored on SD card)

Show Less

System for cooling, transporting, and safe storage of electric cars

Features:

• Effectively floods extinguished electric and hybrid vehicles for safe transport and storage
• Only 45 lbs. Easy transport to usage site
• Double PVC-coated tarpaulin for up to 10-year lifespan before use
• Quick storz coupling for connecting hoses
• Simple and fast operation before transport
• Can store vehicle for up to one month in EVIS before being sent for disposal

Options:

• Easy storage lifting bags

Show Less

Designed for fast, safe, and effortless removal and of EV Battery Packs

A specially crafted transmission jack for the extraction of battery packs from electric vehicles at the end of their life cycle. Platforms are readily replaceable, catering to all battery models, as well as LPG-CNG tanks, engines, gearboxes, and differentials.

• Enhances productivity and safety during disassembly
• Specifically designed for efficient battery pack removal
• Features an interchangeable platform
• Ensures correct posture and ergonomics for the operator
• Compact, stable, and easy to maneuver
• Supports the entire weight of the battery block
• Maintains alignment during disconnection
• Effortlessly transports to battery disassembly or storage stations

Show Less