Used Scrap & Demolition Equipment

Rebuilt GENSCO Cable Stripping Machine
Wright's model SS600HD c/w Motorized Nibbler blade for Steel jacked or braided insulation (on/off control)
Capacity: Cable Ø from 2 in"- 6.2" in (50mm to 157.5mm) Oversize feed rollers with teeth, quenched & tempered & designed for intensive work with steel armored cables. Supplied with the emergency safety braking system, guards, working table & full adjustments for cable size. Provided an electrical starting panel with overload protection, pendant control with forward and reverse controls, and electrical 460V electrics, 3 phase, 60 HZ. Length: approx. 59” / 1500 mm - Width:  approx. 35.5” / 900 mm - Height: approx. 62” / 1600 mm - Largest Weight: approx. 2200 lbs / 1000 kgs
Price: $ 48,800 USD

Show Less

CANMAG Cast Steel Scrap Magnet
Model LMR170

• 67" Diameter Cast Steel Shell
• 82 Cold amps at 230V DC
• Requires min. 20kW generator
• Weight: 7,800 lbs (aluminum coil)
• 8 mo. Warranty
• c/w new heavy chains, connectors
  Price: $ 22,000 USD

NATIONAL COIL Cast Steel Scrap Magnet
Model Millmaster 68D

• 68" Diameter Cast Steel Shell
• 73.3 Cold amps at 230V DC
• Requires min. 20kW generator
• Weight: 10,350 lbs (copper coil)
• 6 mo. Warranty
• c/w new heavy chains, connectors
  Price: $ 28,000 USD

Show Less

Used Hustler Conveyor Co "Money Maker" vibratory separation table with adjustable over belt magnet. Power req. 460V 3 phase electrics 120V electric controls. The Money Maker is portable and no foundation is necessary. Foot operated start and stop pedal in addition to TEFC motors and controls. Equipped with a self-cleaning permanent cross-belt magnet, which is adjustable by hydraulics and an automatic hydraulic dumper for drums or Gaylord boxes. Another great feature is an automatic dirt removal system with discharge chute.
PRICE: $ 45,000 USD Loaded

Show Less

GUIDETTI SINCRO MILL 415 WIRE PROCESSING SYSTEM
SINCRO MILL 415 Processing System (for a midsize-large processor, all types of wire and cable especially LOW GRADE) – 75HP motor power - Automated system with PMG600-E pre-shredding machine for simple operation and processing of cable and wire
MAX INPUT CABLE SIZE – PRESHRED (1.75-2” shred)
APPROX. THROUGHPUT CAP. – 550 – 800 lbs per hour
Simultaneous processing of rigid to small fine cable & wire without needing pre-selection or pre-sorting.  The Mill is a fully integrated system with a primary infeed granulator, a zig-zag separator for heavy chops, pneumatic transport, a secondary refining mill for all wires, and a vibratory separation table. Dust, foam paper, and fiber are removed by a self-standing dust system connected to the plant. Heavy metal pieces coming from plugs, connectors, and rigid copper wires, are separated directly by way of a zig-zag output, while very thin cables are further reduced and balled in the refiner, improving the quality of separation, and reducing the loss of fine metal or shavings in the plastic tailings. Clean chops leave the machine in one direction where lighter waste is moved away from the machine by way of an adjustable air control system.  An additional aspiration system can be added to recover any fine metal.  Dust filtration indoor included.

Contact Us for Pricing or speak to a Sales Rep

Show Less

HEAVY DUTY Hydraulic Alligator Shear for scrap metal c/w Hydraulic Scrap Hold Down arm.
Model DELTAX 4/610E (Foot pedal control)
Complete with 24-inch blades
10 HP 230/460/575-volt motor, 3 phase (Single phase optional)
Capacity Rounds: 2” mild steel rounds
Weighs approx 2,650 lbs
120-ton shearing force
Floor Space: approx 65” x 95”
Certified rebuilt, switches, controls, stroke adjustment, supplied with guard for cutting head…. Single-stroke Electric foot pedal control for cutting, etc.
PRICE: $24,890 USD + shipping

Show Less

HEAVY DUTY Hydraulic Alligator Shear for scrap metal
Model SCOTTY #10
Complete with 10-inch blades
15 HP 230 volt motor, 3 phase
Capacity Rounds: 2” mild steel rounds
Weighs approx 3,000 lbs
120-ton shearing force
Floor Space: approx 65” x 90”
Fully rebuilt Hyd. Cylinder hoses,  Limit Switches and Controls repaired valve and stroke adjustment, supplied with new guard for cutting head…. Dual electric foot pedal control
PRICE: $15,200 (US Only)

Show Less

MERCURY 120 BRIQUETTING PRESS
A high-speed production baler for non-ferrous, cans and light steel applications.  Features include continuous feeding with powerful shearing ram, side compression cylinder, and automatic cycling.  Produces a 12” x 12” x variable length bale at a rate of up to 6-8 tons per hour – depending on the material.  Bale exits cleanly from the side of the machine.  Electric three-phase power is required.

Specifications:
Dual Ram – Auto Cycle with ShearLid on Main Ram
Bale Size:  12” x 12” x var.
Loading Hopper:  59” L x 35” W x 24” H
Baling Chamber:  71” L x 35” W x 12” H
Bale Weight:  approx. 65-160 lbs.(approx)
Operating Cycle:  Approx. 40 seconds(automatic)
Hourly Production:  approx. 3-8 tons(approx)
Stationary Electric w/ 60 HP motor 3Phase
Operating Pressure:  3625 psi
Maximum Pressure on Main / Shear Ram: 220 tons
Maximum Pressure on Side Ram:  approx. 89 tons
Machine Dimensions: approx. 213” L x 122” W x 79” H
Machine Weight:  approx. 22000 lbs.

Contact Us for Pricing or speak to a Sales Rep

Show Less

Strip Heavy-Duty Cable from 1/16" - 4-1/2" diam

• Strip heavy-duty wire 1/16" x 4-1/2" diameter
• Stripping Speed:110'/min
• Fully adjustable blade and feed roller assembly
• Forward and reverse control
• Automatic safety braking system
• Separate stripping area for small wire
  Overall Dimension: Approx. 30"x 29"x47"
  Weight: approx. 780 lbs / 354 kgs
  3HP / 220V Single Phase and 575V Three Phase

PRICE: $ 7,200 USD

Show Less

Used Downstroke Vertical Scrap Balers
Balers designed for light gauge and heavy scrap, Al. extrusion, aluminum cans/bottles, copper, OCC, paper, etc.  These balers are built much heavier with tremendous downforce platen strength offering greater bale density

MAXPAK Model 6020-66-7 - 7" main cyl, 4.5" rod, 66" stroke, ram pressure = 90,000 lbs - Bale size = 30"x48"x60" - 20HP 230V/3/60
Weight = 7,000 lbs - Height = 13'6"
Price: $ Call our office

SELCO/HARRIS Model VNF-5 - 8" main cyl, 5" rod, 54" stroke, ram pressure = 113,000 lbs - Bale size = 30"x48"x60" - 20HP 230V/3/60
Weight = 11,500 lbs - Height = 13.6"
Price: $ Call our office

Show Less

Used (2024) Skid Steer Scrap Grapple c/w dual hydarulic arms, lower bucket with bolt on blade, 73" wide x 34" depth - 24" high.  Comes with quick attach, hyd. hoses and fittings
Price: $5,600 USD + shipping