Production Rotary Rebar Benders

THE PF-S MACHINES - our top of the line heavy duty production benders. 

Max Rebar Capacity:

PF44-S - #8 – 1” – 25M
PF48-S - #10 – 1-1/4” – 30M
PF55-S - #11 – 1-3/8” – 35M
PF62-S - #14 – 1-5/8” – 45M

Features:

• Choice of 2 or 4 full length adjustable rails for single or double bending.
• Choice of control systems (Single Angle Pin Control, 9x9 or 10/50 Digital Control Panel)
• Dual foot pedal controls
• Large diameter rollers (up to 300mm) for all bar sizes
• Stirrup toolset
• Heavy duty bending bracket with replaceable wear plate (see photo)
• End rollers on the tabletop
• Stand and bend in any direction and from any position with full length adjustable rails 
• Clear tabletop

Options:

1. Variable speed control with no mechanical brake
2. Attachments for spirals and hoops

Electric Power/Requirements:

Up to 7.5 HP 
Three phase

Show Less

Max Rebar Capacity:

PF36-N - #8 – 1” – 25M 
PF44-N - #10 – 1-1/4” – 30M 
PF48-N - #10 – 1-1/4” – 30M 

Features:

1. Dual (half length) adjustable rails for precise setting of bars and angle correction
2. Upgraded components and tooling
3. A choice of control systems (Single Angle Pin Control, 9x9 or 10/50 Digital Control Panel
4. Toolset for stirrups
5. Pins and rolls and
6. Foot pedal control.

Options:

1. Variable speed control option
2. Single phase electrics on the PF32-N
3. Spiral / Hoop attachments

Electric Power/Requirements:

Up to 4 HP Motor 
Single or Three Phase

Show Less

K and L MACHINES - unmatched high precision benders. They have a patented bending system that is based on a fixed central pin. The pin secures the rod from being dragged or ribbed while bending.

Max Capacities:

K Series: #14 - 1-11/16" - 45M Rebar
L Series: #11 - 1-3/8” - 35M Rebar

Features:

1. Very rugged
2. High precision
3. Fixed pin bending for constant bending accuracy
4. Single or dual direction bending
5. Dual speed control
6. Easy Angle Controller with sequence programed shapes 
7. Adjust the angles +/- 9° without changing the set values.
8. Easy to maintain

Show Less

PFT MACHINES - a convenient combination machine that both cuts and bends. Angles are set by placing up to nine pins around the turntable. These pins set the order of stops/angles on the control panel. From there, the machine will automatically sequence from bend to bend as pre-set.

Max Rebar Cut and Bend Capacities:

PFT 32/26 #6 – 3/4” – 20M 
PFT 38/30 #8 – 1” – 25M 

Features:

1. Toggle switch to alternate from bending to cutting
2. 9 x 9 Controller
3. Fine tune dial for angle adjustment  
4. Single Speed 9 RPM
5. Cast steel cutting head 
6. Safety cover for cutting area with interlock switch
7. Full set of pins and rolls for standard bending
8. Stirrup toolset
9. Foot pedal control

Options:

1. Spiral radius attachment
2. Variable speed control (9 - 18 RPM)?

Electric Power/Requirements:

Up to 2.5 HP 
Available in single or three phase

Show Less

P Machines - our entry level production bender for full CW and CCW continuous rotation. Angles are set by pin placement. Up to 9 pins can be placed around the turntable. The operator can set the stops and angles on the control panel for auto sequencing.

Max Capacities:

P-36 #8 – 1”– 25 M Rebar

P-44 #10 – 1-1/4” – 30M Rebar

Features:

1. Stirrup toolset
2. Full set of pins and rollers
3. Electric foot pedal
4. Easy angle setting through pin placement
5. Single Speed: 8 RPM
6. 9 x 9 Controller: 

Options:

1. Spiral radius attachment
2. Variable speed control (9-18 RPM)

Electric Power/Requirements:

Up to 3HP
Single or Three Phase 

Show Less

Rebar Capacity Range

#3 (3/8”) to #6 (3/4”) Rebar (Gr. 60)

Features:

• Designed for spiral production and to radius small diameter bars. 
• Equipped with 2 driving rolls and one adjustable centre idler roll for diameter adjustment
• Speed Variator - dial control
• Minimum ring diameter:
  6” Ø on 3/8” steel / 140 mm Ø on 10 mm
  30” Ø  on ¾” steel / 750 mm Ø on 20 mm
• Unlimited maximum.
• c/w moveable guard with safety switch, foot pedal control

Electric Power/Requirements:

• 1 HP
• Single phase
• 220 v.

Approx Weight:

475 lbs / 215 kgs

Show Less

CAL34 Spiral Machine - bends rebar into rings and spirals, from a min. radius of 7" to an unlimited max. The rollers are made of heat-treated alloy steel. This machine can work in a vertical or horizontal position and can operate in two speeds, 8 or 16 RPM

Max Rebar Capacity:

#8 - 1" - 25M 

Features:

1. Two speeds (8 and 16 RPM)
2. Dual drive rollers in hardened steel
3. Dual foot pedal controls
4. Safety guard with electric interlock
5. Input roller help to feed the bending rolls at correct height
6. Adjustable pitch height for spirals, with locking handle
7. Supplied with wheels

Electric Power/Requirements:

5 HP Motor
Three phase

Weight: 

Approx. 780 lbs. / 350 kg

Show Less

TYR-HD25 - a well priced machine for bending rebar rings and spirals from an approx. min. dia. of 7" to an unlimited max. Ideal for work sites that need to bend rebar quickly on the job and precast.

Rebar Dia. Capacity:

#6 - 20M - 3/4" 

Features:

1. Three Adjustable Bend Rollers
2. Special center roller
3. Speed approx. 30 RPM
4. Adjustable plate for pitch height of spirals

Electric Power/Requirements:

2 HP Motor
230 v.
Single phase
30 amps

Weight: approx. 485 lbs.

Show Less

Spiral 88 - a versatile ring and spiral rebar bending machine. Bend rebar into coils in vertical and horizontal positions.

Max Rebar Capacities:

Horizontal Position: #10 - 1" - 25M
Vertical Position: #6 - 3/4" - 19M
Min. Dia.: 8/10" (200/250mm)
Max. Dia.: No limit

Features:

1. Comes with Hydraulic Release Device that allows you to make partial hoops
2. Two-speed selector for vol. of 60'-65' (18-20mm) per min.

Options:

1. Stand with rollers

Electric Power/Requirements:

Two Hydraulic Reduction Units with 3 HP Motors
Hydraulic Release Device with 2 HP Motor
Overall Dimension: 41" x 55" x 48"

Weight: 1000 lbs.

Show Less

Gensco offers Shearline equipment. If you do not see what you are looking for, call us or send us an e-mail. We can built any type of conveyor you are looking for.

SHEARLINES:
PRELOAD CONVEYORS
GAUGING CONVEYORS
SINGLE & DOUBLE TIER STOCK RACKS
SINGLE SIDE AND DOUBLE SIDED POCKETS
VIBRATORY TABLES
EXTENSION TABLES
TRANSFER TABLES
CONTROL: Manual or Powered

Gensco can supply any kind of rebar conveyor equipment, from standard sizes to custom lengths. We don't only deliver complete lines but individual components as well.

Show Less